Restore your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may want to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the configurations or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a simple process that can be performed in just a few actions.

• Initially ensuring your red dot sight is activated.
• Find the small reset button on the bottom of the device.
• Utilize a thin tool to depress the reset button for approximately 5 milliseconds.
• Disengage the switch and your Holosun EPS Carry Red Dot sight will power cycle.
• Its red dot sight should now be set back to its factory settings.

Return to Your Holosun EPS Carry Red Dot to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to go back to basics, resetting it to its factory configuration is a breeze. First, locate the tiny button on the rear of your optic. Then, sustain it for around ten seconds until you see the indicator light change. Your Holosun EPS Carry is now reverted to its factory settings, ready for precise aiming.

revive your Holosun EPS Carry Back to Action

Is your beloved Holosun EPS Carry experiencing some issues? Don't despair! A simple factory reset can often solve the problem and get your red dot sight back to its former glory. Before you begin, remember to detach the battery from your Holosun EPS Carry to prevent unexpected activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these straightforward steps:

• Hold down the power button for approximately 10 seconds.
• An indicator will flash, indicating that the reset is being performed.
• Stop pressing the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can re-attach the battery and test your sight's functionality. If you encounter any further difficulties, don't hesitate to contactsupport team.

Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Accomplish these steps carefully to ensure a successful factory reset.

• Beginning with, Energize your Holosun EPS Carry by pressing the power button.
• Next, press and hold both the mode button and the up/down adjustment button simultaneously.
• During continue holding these buttons, press the power button once.
• You will show a confirmation prompt indicating that the reset process is initiated.
• Enable the process to conclude. This may take a few moments. Once done, your Holosun EPS Carry will automatically shutdown.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule get more info style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Erase All Settings on Your Holosun EPS Carry

To Default reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Holding a specific button combination. Consult your Instruction for the exact button sequence for your model. Once in the settings menu, look for an option that says "Reset All". Select this option and confirm the reset. Your sight will then power off and restart with all settings Restored to their default values.

Restore your Holosun EPS Carry with a Factory Standard Settings

If your Holosun EPS Carry is acting erratically, a factory reset might be the answer. This will restore your sight to its initial settings, clearing any personalized configurations you've made. To accomplish this reset, observe these easy steps:

• First, identify the reset button on your EPS Carry.
• Secondly, engage a small object, like a paperclip, to push the reset lever.
• As you keep the reset button activated, turn your EPS Carry.
• The sight will display a message indicating that the reset is complete.

Once the reset is successful, your EPS Carry will be set to its factory settings.

Report this wiki page